Currency USD
Submerged Arc Fixed Welder, 72-12 buy in Tyler
Buy Submerged Arc Fixed Welder, 72-12
Submerged Arc Fixed Welder, 72-12

Submerged Arc Fixed Welder, 72-12

In stock
Reconfirm the price with seller
Shipping:
Seller
USA, Tyler
(View map)
+1(9 
Display phones
Technical characteristics
  • BrandARC
Description
Allowable Frame Size
Frames can vary from 6" to 72" deep, 4"-12" flanges in 3/16"-1" thickness and 11 gauge to ½" web. Each flange can be of different width and can change width within the frame length. The straight flange can be a 3 ¼" maximum flange width channel.

Materials Alignment and Clamp System
A structural clamp and alignment system allows member production up to the full bed length. Flanges and webs are aligned and clamped using 5' pneumatic clamps, operating from individual controls. A proprietary system quickly locates the clamps. The clamp alignment system counteracts welding distortion. Clamp units allow for up to 15 degrees of angular frame change. The clamp system's overall length is typically 60'-140'.

Gantry Specifications
A variable speed gantry system supports all welding control, weld head guidance and flux recovery functions. All gantry machine functions (forward and reverse travel, digital travel speed, welding head up and down, welding head in and out and flux recovery) are contained in one enclosure. Cables and hoses are routed within the gantry for protection.

Weld seam alignment
Each weld head operates individually. A proprietary weld head guidance system includes adjustable vertical and horizontal pressure and allows rotation for accurate weld joint placement. Welding can be completed to within 2-3 inches of the frame end.

Welding Power Units & Controls
Various submerged arc welding equipment can be provided. Lincoln 600 -1,000 ampere power sources, analog or digital controls and single or twin wire nozzles can be included. Lincoln DC 600 power sources and Lincoln NA-3 controls, along with single wire weld nozzles are standard.

Welding Specifications
Welding speed depends on the welding equipment specified, frame member size and welding wire and flux consumables used. Both flange to web welds are completed in a single pass, with welding performed on top of the web. Weld fillet size is user-controlled by the welding procedure and gantry travel speed.

Flux Recovery
Two electrically-powered, double filtration flux recovery units are included. The flux recovery units directly recycle usable flux to the flux dispensing hoppers.

Welder Power Requirements
Welding electrical requirements vary based on supplied power sources. Typical three-phase electrical can range from 230-575 volts in 50 or 60 Hz. Single phase electrical is 220-240 volts in 50 or 60 Hz. Air consumption averages 4-5 CFM at 100 PSI.

Machine Shipment
The complete welder will fit on a 45' or longer trailer or in a 40' open-top container.
Contact the seller
Submerged Arc Fixed Welder, 72-12
Submerged Arc Fixed Welder, 72-12
Shipping method
Compare0
ClearSelected items: 0